User Manual Q&AAnswer
Oct 11, 2025 - 01:39 PM
The FERM PRM1019P 2200W Precision Router offers variable speed control to accommodate different materials and router bit sizes. Here is a guide on how to select the appropriate speed setting based on the material and router bit size:
1. **Material:** Determine the type of material you will be routing (e.g., hardwood, softwood, aluminum, plastic).
2. **Router Bit Diameter:** Consider the diameter of the router bit you will be using.
3. **Speed Stages:** Use the following speed stages as a reference for selecting the appropriate speed setting:
- **Hardwood:**
- Diameter > 20 mm: Speed stages 1-2
- Diameter 10-20 mm: Speed stages 3-4
- Diameter < 10 mm: Speed stages 5-max
- **Softwood:**
- Diameter > 20 mm: Speed stages 1-3
- Diameter 10-20 mm: Speed stages 3-6
- Diameter < 10 mm: Speed stages 5-max
- **Aluminum:**
- Diameter > 15 mm: Speed stage 1
- Diameter < 15 mm: Speed stages 1-2
- **Plastic:**
- Diameter > 15 mm: Speed stages 1-2
- Diameter < 15 mm: Speed stages 2-3
4. **Adjustment:** Preselect the required speed using the thumbwheel on the router based on the material and router bit size. Ensure the router reaches full speed before starting your routing task.
5. **Testing:** It is recommended to conduct practical testing to determine the most suitable speed setting for your specific routing application.
By following these guidelines and considering the material, router bit diameter, and speed stages provided, you can effectively select the appropriate speed setting for your routing tasks using the FERM PRM1019P 2200W Precision Router.
Add New Comment