How to configure the Moku: Pro Data Logger instrument to record data from specific channels at a desired rate? (Liquid Instruments Data Logger User Manual)

Answer

manuals.plus

Oct 10, 2025 - 01:06 PM

To configure the Moku Pro Data Logger for recording data from specific channels at a desired rate and duration, follow these steps:

1. **Channel Configuration:**

- Enable the channels you wish to record by setting the appropriate voltage range (400 mVpp, 4 Vpp, or 40Vpp), coupling (AC or DC), and impedance (50 Ω or 1 MΩ).

- Ensure that your signals are correctly connected and configured in the plotter window.

2. **Acquisition Parameters:**

- Configure the acquisition rate between 10 Sa/s and 10 MSa/s using the acquisition sidebar.

- Choose between normal mode (down-sampling by discarding points) or precision mode (down-sampling by averaging) for better precision and reduced noise.

3. **Recording Duration and Comments:**

- Set the recording duration (up to 10,000 hours) and add any comments you want to be saved with the file.

4. **Starting the Log:**

- Tap the "record" button to start recording data. The status indicator will display the logging progress.

5. **Saving and Sharing Data:**

- To save and share the recorded data, tap the "share" button to access the file manager.

- You can select the files you want to share and choose to save them to "My Files" or online services like Dropbox, Mail, or iCloud.

By following these steps, you can configure the Moku Pro Data Logger to record data from specific channels at your desired rate and duration, choose the appropriate acquisition mode, and easily save and share the captured data logs.