User Manual Q&AAnswer
Oct 09, 2025 - 04:15 PM
According to the manual for the Sub-Zero ICBID-CI Integrated Drawer Combination, here are some troubleshooting steps for common icemaker issues:
1. **No Ice Production:** If the icemaker is not producing ice, check if the icemaker is turned on and the door/drawer switch is closed. Ensure that the water supply is connected and turned on. Verify that the control board is functioning correctly and not displaying any error messages.
2. **Water Fill Time:** If the icemaker is not filling with water properly, inspect the water valve(s) for any blockages or malfunctions. The control board controls the water fill time, so ensure that it is operating correctly. Check for any kinks or obstructions in the water supply line.
3. **Error Messages:** If the control board displays error messages related to the icemaker, refer to the manual for specific error code explanations. Reset the control board by turning off the power and then turning it back on after a few minutes.
4. **Max Ice Feature:** If you are using the Max Ice feature and notice issues with the evaporator fan speed, ensure that the compressor is running as intended. The fan speed should adjust accordingly based on the compressor's operation.
5. **Sabbath Mode:** If the icemaker is not working and you have enabled Sabbath Mode, remember that this feature disables the icemaker operation. Check if Sabbath Mode is activated and consider deactivating it if ice production is required.
If the above troubleshooting steps do not resolve the issue with the icemaker on the Sub-Zero ICBID-CI Integrated Drawer Combination, it is recommended to contact Sub-Zero customer service or a certified technician for further assistance.
Add New Comment