User Manual Q&AAnswer
Oct 09, 2025 - 01:38 PM
To properly connect and use the VOLTCRAFT 2279964 SPS-3000/R-N Power Adapter for PI3 with your Raspberry Pi 3 computer, follow these steps based on the provided manual:
1. **Intended Use:** The power adapter is designed to operate a USB device with a micro USB port, such as a Raspberry Pi 3 computer. It is intended for indoor use only and should not be used outdoors or in moist environments.
2. **Safety Instructions:** Always read and follow the safety instructions provided in the manual to prevent personal injury or damage to property. Ensure the product is not visibly damaged, working properly, or exposed to extreme conditions before use.
3. **Operation:**
- Turn off the Raspberry Pi 3 computer before connecting it to the power adapter.
- Connect the micro USB connector on the low voltage cable to the micro USB port on your Raspberry Pi 3 computer.
- Insert the mains plug into a standard household mains socket with a working voltage of 100–240 V/AC.
- The power adapter delivers current to the connected device via the USB cable.
- Always turn off the Raspberry Pi 3 computer before unplugging it from the power adapter.
- Unplug the power adapter from the mains socket after use.
4. **Care and Cleaning:**
- Disconnect the power adapter from the mains before cleaning.
- Use a dry, fiber-free cloth to clean the product. Avoid using aggressive cleaning agents or chemical solutions.
5. **Disposal:** Follow the disposal guidelines provided in the manual for proper disposal of the product at the end of its service life.
By following these steps and adhering to the safety instructions, you can effectively and safely use the VOLTCRAFT 2279964 SPS-3000/R-N Power Adapter for PI3 with your Raspberry Pi 3 computer.
Add New Comment