User Manual Q&AAnswer
Oct 09, 2025 - 12:30 PM
To adjust the output voltage and current settings on the ZK-4KX CNC DC DC Buck Boost Converter, follow these steps:
**Adjusting Output Voltage:**
1. Short press the U/I button while in the Output Voltage Display to enter the output voltage setting mode.
2. Rotate the rotary encoder xxxx to change the output voltage setting.
3. Press the xxxx to change the digits for quicker results.
4. Press the U/I button twice to save the setting, or wait 10 seconds for automatic saving.
**Setting Current Value:**
1. Press the U/I button twice while in the voltage output screen to set the current limiter.
2. Rotate the xxxx or push the xxxx in to change the digit and increase the setting speed.
3. Press the U/I button to save the setting, or wait 10 seconds for automatic saving.
4. The red Constant Current (CC) LED lights up when reaching the current limit value.
By following these steps, you can easily adjust the output voltage and current settings on the ZK-4KX CNC DC DC Buck Boost Converter as per your requirements.
Add New Comment