User Manual Q&AAnswer
Oct 05, 2025 - 11:30 AM
According to the manual, here is how you can set up the DDE 2-Tool Control Unit with peripherals and pedals:
**Peripheral Set Up:**
1. After connecting the module, enter the Peripherals Menu on the control unit.
2. Select the port you want to join with the module.
3. Choose the module from the list of peripheral connections. The first connection is denoted as "a", the second as "b", and so on (e.g., MS_a, MS_b).
4. Press Menu or Back to save changes.
**Pedal Set Up:**
1. Enter the Peripherals Menu on the control unit.
2. Select the port you want to connect to the pedal.
3. Choose the pedal from the list. Note that the first connection is denoted as "a", the second as "b", and so on (e.g., PD_a, PD_b).
4. Set the pedal function according to your work needs.
Remember to follow these steps carefully to ensure proper setup and functionality of your DDE 2-Tool Control Unit with peripherals and pedals.
Add New Comment