How to properly install the appliance, set the temperature, use the control panel, and ensure energy efficiency? (aspes AA18900FNF Refrigerator Freezer Instructions)

Answer

manuals.plus

Oct 03, 2025 - 03:04 PM

#### Installation:

- Before installing the appliance, ensure it is unplugged and empty.

- Allow at least four hours before connecting the appliance to allow the oil to flow back in the compressor.

- Ensure adequate air circulation around the appliance to prevent overheating.

- Position the appliance away from heat sources and ensure free air circulation around the back of the cabinet.

- The appliance should not be located close to radiators or cookers.

- Ensure the mains plug is easily accessible after installation.

#### Temperature Settings:

- Use the control panel to adjust the temperature of the freezer and fridge compartments.

- The recommended temperature for the fridge compartment is between 2°C to 8°C and for the freezer compartment is between -14°C to -22°C.

- Utilize different modes like SMART, ECO, SUPER COOLING, and SUPER FREEZING based on your needs for efficient cooling.

#### Energy Efficiency Tips:

- Avoid putting hot food directly into the appliance.

- Do not pack food too closely together to allow for proper air circulation.

- Ensure food does not touch the back of the compartments.

- Minimize opening the doors frequently and avoid keeping them open for extended periods.

- Set the thermostat to appropriate temperatures and utilize energy-saving modes like ECO when possible.

- Keep accessories like drawers and shelves in place for lower energy consumption.

By following these guidelines for installation, temperature settings, and energy efficiency, you can ensure optimal performance and longevity of your aspes AA18900FNF Side by Side Refrigerator Freezer. For more detailed instructions and troubleshooting, refer to the user manual provided with the appliance.