User Manual Q&AAnswer
Oct 03, 2025 - 11:16 AM
To change the flash pattern on the cell2 B18 LED Beacon, follow these steps as per the user manual:
1. **Open the Dome Lens:** Twist the dome lens counter-clockwise and lift it to open.
2. **Activate Warning Mode:** While the beacon is in operation, activate the warning mode.
3. **Change Flash Pattern:** Momentarily push the RED BUTTON to cycle through different flash patterns. Refer to the Flash Patterns Chart provided in the manual to select the desired pattern.
4. **Close the Dome Lens:** After selecting the desired flash pattern, twist and tighten the dome lens clockwise to close it securely.
By following these steps, users can easily change the flash pattern on the cell2 B18 LED Beacon to suit their specific requirements for warning or signaling purposes.
Add New Comment