User Manual Q&AAnswer
Oct 03, 2025 - 10:53 AM
To install a microSD card in the Zebra TC58 Touch Mobile Computer, follow these steps as outlined in the user manual:
1. Lift the access door located under the battery pack.
2. Slide the microSD card holder to the Open position.
3. Lift the microSD card holder door.
4. Insert the microSD card into the card holder ensuring that the card slides into the holding tabs on each side of the door.
5. Close the microSD card holder door.
6. Slide the microSD card holder door to the Lock position.
7. Ensure the access door is replaced and securely seated to ensure proper device sealing.
Remember to follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. This includes working on an ESD mat and ensuring the operator is properly grounded.
For more detailed information or visuals, refer to the Zebra TC58 Touch Mobile Computer user manual.
Add New Comment