How do I install the ALBA JAMY MHARM Monitor Arm? (ALBA JAMY Monitor Arm Instructions)

Answer

manuals.plus

Oct 02, 2025 - 03:37 PM

Here are the step-by-step instructions for installing the ALBA JAMY MHARM Monitor Arm:

1. **Prepare the Work Area:** Clear a space on your desk or table where you want to install the monitor arm. Ensure that there is enough space for the arm to move freely.

2. **Identify Parts:** Lay out all the parts included in the package and make sure you have everything required for installation, including screws, brackets, and tools.

3. **Attach the Base:** Secure the base of the monitor arm to your desk or table using the provided screws. Make sure the base is firmly attached and stable.

4. **Attach the Monitor Bracket:** Attach the monitor bracket to the back of your monitor using the appropriate screws. Ensure that the bracket is securely fastened to the monitor.

5. **Attach the Arm:** Connect the arm of the monitor mount to the base by aligning the attachment points and securing them with the provided screws. Make sure the arm is properly attached and can move smoothly.

6. **Adjust the Height and Angle:** Adjust the height and angle of the monitor arm to your desired position. Tighten any adjustment knobs or screws to secure the arm in place.

7. **Cable Management:** Organize and secure any cables or wires connected to your monitor to prevent tangling or interference with the arm's movement.

8. **Test the Monitor Arm:** Once the installation is complete, test the monitor arm by moving the monitor to different positions to ensure it functions correctly and securely holds the monitor.

By following these steps and referring to the manual provided with the ALBA JAMY MHARM Monitor Arm, you should be able to successfully install and set up your monitor arm for optimal use.