User Manual Q&AAnswer
Oct 02, 2025 - 10:19 AM
To properly install the SCANSTRUT HS-02 Manual Hinge System for your marine electronics device, follow these steps:
1. **Parts Required:** You will need M8 x 25mm+ length M8 fasteners for securing the hinge base. Please ensure you have these fasteners before starting the installation process.
2. **Tools Required:** You will need appropriate tools to secure the hinge base with the fasteners. Make sure you have the necessary tools such as a screwdriver or wrench for installation.
3. **Installation Guidelines:**
- The HS-02 Hinge System is designed for use with approved marine electronics devices as stated in the latest Scanstrut Product Guide. Using unapproved products or overloading the hinge system will void any product warranty.
- Scanstrut does not supply fastenings for fixing the product to the chosen surface. It is your responsibility to choose suitable fastenings for this purpose.
- Ensure that the installation is done correctly to prevent any damage. Regularly inspect the assembly for loose parts or signs of damage.
- The product is specifically designed for mounting approved marine electronics under normal boating conditions.
4. **Contact Information:** If you have any further questions or need assistance with the installation, you can contact Scanstrut at the provided contact details:
- Address: 5 Darts Business Park, Clyst St. George, Exeter, Devon, UK EX30QH
- Tel: +44(0)1392531280
- E-mail: sales@scanstrut.com
- Website: www.scanstrut.com
By following these guidelines and precautions, you can ensure a proper installation of the SCANSTRUT HS-02 Manual Hinge System for your marine electronics device.
Add New Comment