User Manual Q&AAnswer
Oct 01, 2025 - 05:11 PM
To pair multiple GEARELEC GX10 Bluetooth Intercom units together for communication, follow these steps as outlined in the user manual:
1. Power on all the GX10 intercom units.
2. Hold the M button on each unit to activate passive pairing mode. The red and blue lights will flash quickly and alternatively.
3. Press the Multifunction button of any unit (No.1 unit). The red and blue lights will flash slowly and alternatively, indicating the unit is in automatic pairing mode.
4. After successful pairing, a 'Device Connected' voice prompt will be heard.
It is recommended to communicate with multiple riders within 1000 meters for optimal performance, as longer ranges may experience more interference.
**Additional Tips:**
- The GEARELEC GX10 supports communication between 2-8 riders.
- The Bluetooth version is 5.2, and the supported Bluetooth protocols include HSP, HFP, A2DP, and AVRCP.
- The intercom has a standby time of up to 400 hours, talk time of 35 hours (with lights off) or 25 hours (with lights always-on), and music time of up to 40 hours.
- To ensure the longevity of the battery, it is recommended to charge the intercom every two months if not in use for an extended period.
- The device should be stored within a temperature range of -20°C to 50°C to maintain its service life.
- FCC regulations and precautions for proper operation and interference management are also provided in the manual.
By following these pairing instructions and best practices, users can effectively set up and utilize their GEARELEC GX10 Bluetooth Intercom system for seamless communication while riding.
Add New Comment