User Manual Q&AAnswer
Oct 01, 2025 - 12:25 PM
To set up and use the HDMI 1.4 Matrix 6x2 effectively, follow these steps based on the provided user manual:
1. **Connections:**
- Connect your HDMI sources (such as DVD players, gaming consoles) to the input ports on the rear panel of the matrix.
- Connect your HDMI displays (HDTV or monitor) to the HDMI OUT ports on the rear panel.
- Connect your audio equipment (speakers or amplifier) to the Stereo OUT or Toslink OUT ports on the rear panel.
- Plug the 5V DC power supply into the unit and connect the adapter to an AC wall outlet.
2. **Front Panel Controls:**
- Use the ON/OFF switch to power on/off the matrix.
- Press the OUTA KEY or OUTB KEY to select the input source to HDMI OUT A or HDMI OUT B respectively.
- Press the EDID KEY to select the audio output mode (2.0CH, 5.1CH, 7.1CH).
- Press the ARC KEY to open or close the ARC function.
- Press the RST KEY to reset the matrix to factory settings.
3. **Remote Control Functions:**
- Use the STANDBY button to standby or power on the matrix.
- Press the Audio EDID button to select the audio output mode.
- Press the ARC button to open or close the ARC function.
- Press the PIP button to open or close the Picture-in-Picture function.
- Use the Select and Enter buttons to choose and confirm the PIP source.
- Use the OUTA and OUTB buttons to switch between input sources for HDMI OUT A and HDMI OUT B.
4. **Additional Information:**
- Ensure that your HDTV supports ARC function if you intend to use it. When ARC is enabled, the Toslink output will correspond to the HDTV's audio.
- The first input port supports HDCP2.2 input only.
- Output A supports ARC function exclusively.
By following these steps and utilizing the provided controls, you can effectively set up and operate the HDMI 1.4 Matrix 6x2 to route HDMI signals from multiple sources to your displays and audio equipment with ease.
Add New Comment