User Manual Q&AAnswer
Oct 01, 2025 - 11:51 AM
To switch between the two connected computers using the TESmart HDK0402A1U 2-Port Dual Monitor HDMI+DP KVM-Switch, you have several options:
1. **Keyboard Hotkeys:** You can use keyboard hotkeys to switch between the connected computers. Here are the keyboard hotkey commands:
- Press [Right-Alt] key twice to change the active selected computer in display mode 2.
- Select input source 1 in display mode 1.
- Select input source 2 in display mode 1.
- Keyboard and mouse focus on the desktop of input source 1 in display mode 2.
- Keyboard and mouse focus on the desktop of input source 2 in display mode 2.
- Enable or disable the buzzer sound.
- Turn on or off keyboard and mouse pass-through mode.
2. **IR Remote Control:** You can also use the included IR remote control to switch between the connected computers. Here are the IR remote control commands:
- Press "M" to cyclically select PC1 and PC2 or switch to Display mode 1.
- Press "P" to switch to Display mode 2 or swap the desktops of two monitors.
- Press "1" to switch to PC 1 and have the keyboard and mouse focus on the desktop of PC 1.
- Press "2" to switch to PC 2 and have the keyboard and mouse focus on the desktop of PC 2.
3. **Front-Panel Key:** You can also use the front-panel key labeled "SW" to switch between the connected computers.
By following these methods, you can easily switch between the two connected computers using the TESmart HDK0402A1U 2-Port Dual Monitor HDMI+DP KVM-Switch.
Add New Comment