User Manual Q&AAnswer
Sep 29, 2025 - 12:13 PM
To activate the door sensor for remote start operation on the sentiotec PRO-C2 Sauna Control Unit PRO C, follow these steps as per the user manual:
1. **Activate Door Sensor for Remote Start Operation:**
- Open the technician menu by pressing the lower bottom xxxx and the ON/OFF switch simultaneously.
- Turn the top xxxx to the remote start symbol until it flashes.
- "SdO" will appear in the top display, and "SAFE" will appear in the bottom display (standard setting).
- Turn the lower xxxx to the right until "door" appears in the lower display.
- Exit the technician menu by long-pressing the lower xxxx .
2. **Setting the Runtime of the Post-Drying Program:**
- Open the technician menu by pressing the lower bottom xxxx and the ON/OFF switch simultaneously.
- Turn the top xxxx to the humidity symbol until it lights up.
- "SIn" will appear in the top display, and "OFF" will appear in the bottom display.
- Press the lower button to change the setting.
- "dry" will appear in the top display, and "t60" will appear in the bottom display.
- Turn the lower button to select the desired runtime (0 to 60 minutes).
- Exit the technician menu by long-pressing the lower xxxx .
By following these steps from the user manual, you can successfully activate the door sensor for remote start operation and set the runtime of the post-drying program on your sentiotec PRO-C2 Sauna Control Unit PRO C.
Add New Comment