User Manual Q&AAnswer
Sep 28, 2025 - 07:13 PM
According to the instruction manual for the GE MN2S-300 Count Constant Multicolor Mini string lights, here are the steps to replace a blown fuse:
1. **Unplug the Set:** Before changing fuses, ensure that the set is unplugged from the power source.
2. **Locate the Fuse Cover:** Using a flathead screwdriver, open the fuse cover. Slide open the fuse access cover on top of the attachment plug towards the blades.
3. **Remove the Blown Fuse:** Carefully remove the blown fuse from the socket.
4. **Replace with Correct Fuse:** Replace the blown fuse only with a 3Amp, 125 Volt fuse provided with the product. Ensure it is securely in place.
5. **Close the Fuse Cover:** Close the fuse cover securely. Slide closed the fuse access cover on top of the attachment plug. Make sure the door is fully closed and the fuses are completely covered.
6. **Test the Lights:** After replacing the fuse, plug the string lights back in and test to see if they are working properly. If the lights still do not work, there may be another issue that requires further troubleshooting.
By following these steps outlined in the , you should be able to safely and effectively replace a blown fuse in your GE MN2S-300 Count Constant Multicolor Mini string lights.
Add New Comment