User Manual Q&AAnswer
Sep 28, 2025 - 05:17 PM
To switch between the connected devices using the remote control provided with the LINDY 2 Port HDMI 8K60 Switch, follow these steps:
1. Press the "Input 1/2" button on the remote control to switch between Inputs 1 or 2. This will allow you to select the desired source device connected to the HDMI switch.
2. If you want to enable Automatic Switching mode, press the "Auto" button on the remote control. The Auto LED indicator on the switch will turn on, indicating that the Automatic Switching mode is active. In this mode, the switch will automatically switch between the connected devices based on the input signal.
3. If you prefer manual switching mode, press and hold the "Select" button on the switch for 3 seconds. The Auto LED indicator will turn off, indicating that the switch is now in manual switching mode. In this mode, you will need to use the remote control to manually select the input source.
By following these steps, you can easily switch between the connected devices using the remote control provided with the LINDY 2 Port HDMI 8K60 Switch.
Add New Comment