User Manual Q&AAnswer
Sep 28, 2025 - 04:19 PM
According to the manual, programming and using memories on the YAESU FT-757GX All Mode Transceiver is a straightforward process. Here's how you can do it:
1. **Storing Frequencies in Memories:**
- To store a frequency in a memory, tune the transceiver to the desired frequency.
- Press the "MEM" button followed by the memory channel number where you want to store the frequency.
- The frequency is now stored in the selected memory channel.
2. **Recalling Memories:**
- To recall a stored frequency, simply press the memory channel number where the frequency is stored.
- The transceiver will tune to the stored frequency associated with that memory channel.
3. **Scanning Between Memories:**
- To scan between programmed memories, press the "SCAN" button on the transceiver.
- The transceiver will scan between adjacent memories that have been programmed by the operator.
- You can set the scan stop threshold using the RF Gain and Squelch controls.
By following these steps, you can easily program, recall, and scan between memories on the YAESU FT-757GX All Mode Transceiver.
Add New Comment