User Manual Q&AAnswer
Sep 28, 2025 - 03:57 PM
To install the goodram DRAM DDR5 DIMM Memory Module in your computer, follow these steps:
1. **Prepare Your Workspace:** Make sure to work on a clean, well-lit surface. Turn off your computer and disconnect all cables.
2. **Locate the Memory Slots:** Identify the memory slots on your motherboard where the DDR5 DIMM Memory Module will be installed. Refer to your motherboard's manual for the exact location of the memory slots.
3. **Handle the Memory Module Carefully:** Avoid touching the gold connectors on the memory module. Hold the module by the edges to prevent any damage from static electricity.
4. **Align the Notch:** Check the notch on the memory module to ensure it aligns with the notch in the memory slot. The module will only fit in one orientation.
5. **Insert the Memory Module:** Gently but firmly press the memory module into the memory slot. Apply even pressure on both ends until the module clicks into place.
6. **Secure the Memory Module:** Once the memory module is properly seated in the slot, push down on the clips at each end of the slot to secure the module in place.
7. **Power Up Your Computer:** Reconnect all cables and power on your computer. The system should automatically detect the new memory module.
8. **Check System Recognition:** To confirm that the memory module is recognized, you can check the system properties or use system monitoring software to verify the installed memory capacity and speed.
By following these steps, you should be able to successfully install the goodram DRAM DDR5 DIMM Memory Module in your computer and enjoy the enhanced performance it provides.
Add New Comment