User Manual Q&AAnswer
Sep 28, 2025 - 03:41 PM
To connect and set up the Belkin Wemo Smart Light Switch and Wemo Smart Dimmer, follow these steps:
1. **Installation:**
- Ensure the power to the switch or dimmer is turned off at the circuit breaker.
- Remove the existing switch or dimmer from the wall.
- Connect the wires from your wall to the corresponding terminals on the Wemo Smart Light Switch or Dimmer. Follow the wiring diagram provided in the product manual.
- Secure the switch or dimmer to the wall using the provided screws.
- Turn the power back on at the circuit breaker.
2. **Configuration:**
- Download the Wemo app on your smartphone or tablet.
- Follow the in-app instructions to set up your Wemo Smart Light Switch or Dimmer.
- Connect the switch or dimmer to your home Wi-Fi network.
- Configure the switch or dimmer settings, such as naming the device and setting up schedules or automation routines.
3. **Safety Precautions:**
- Use a dry cloth to clean the exterior of the device. Do not use any liquid solutions to avoid shock hazards.
- Ensure the switch or dimmer is installed in a residential and indoor dry location only.
- Do not install the switch or dimmer to control receptacles, motor-operated appliances, fluorescent lighting fixtures, or transformer-supplied appliances.
- Use appropriate wire sizes (14 AWG or 12 AWG) for supply connections.
- Follow all instructions provided by the manufacturer to avoid impairing the protection provided by the equipment.
By following these steps and safety precautions, you can successfully connect and set up your Belkin Wemo Smart Light Switch and Wemo Smart Dimmer for convenient and smart control of your lighting fixtures.
Add New Comment