User Manual Q&AAnswer
Sep 28, 2025 - 02:16 PM
To access the camera's web interface for configuration and viewing, follow these steps as outlined in the user manual:
1. Make sure the camera and your PC are connected to the same local network.
2. Install the IP Scanner software from the provided CD and run it after installation.
3. The IP Scanner will search for the device on the local network and display a list of connected devices with their IP addresses, model numbers, and MAC addresses.
4. Select the applicable device from the list and double-click on it to open the web viewer. Alternatively, you can manually enter the camera's IP address in the address bar of a web browser.
5. The login interface will appear. The default username is "admin" and the default password is "1234". Enter these credentials to log in.
6. Once logged in, you can configure the camera settings and view the camera feed through the web interface.
By following these steps, you should be able to access the camera's web interface successfully for configuration and viewing purposes.
Add New Comment