User Manual Q&AAnswer
Sep 28, 2025 - 01:12 PM
If the LED firmware update process gets interrupted or fails for any reason, follow these steps to troubleshoot and resolve the issue:
1. **Restart the Update Process:** If the update process was interrupted, try restarting it from the beginning. Make sure to follow all the steps mentioned in the user guide carefully.
2. **Check Connection:** Ensure that all connections are secure and properly set up before attempting the update again. Make sure all ARGB cables are correctly connected.
3. **Clear CMOS:** If the update fails again, you may need to clear the CMOS settings on your motherboard. Follow the instructions provided in the user guide to clear CMOS before attempting the update once more.
4. **Use LED Firmware Tool:** If updating through MSI Center did not work, try using the LED Firmware Tool as an alternative method. Follow the steps outlined in the user guide for updating firmware using the LED Firmware Tool.
5. **Contact Support:** If you continue to experience issues with the LED firmware update, it is recommended to contact MSI customer support for further assistance. They can provide additional troubleshooting steps or guide you through the process to ensure a successful update.
Remember, it is crucial to follow the instructions carefully and avoid interrupting the update process to prevent any potential issues with the LED firmware update.
Add New Comment