User Manual Q&AAnswer
Sep 28, 2025 - 11:57 AM
To properly install and operate the SMC ASB Metal Speed Controller with One-Touch Fitting, follow these steps based on the user manual:
1. **Design/Selection:**
- Confirm the specifications and ensure the product is used within the specified range.
- Do not disassemble or modify the product as it may cause damage or malfunction.
- Check the flow rate characteristics and material compatibility before usage.
2. **Mounting:**
- Read the operation manual carefully before installation.
- Tighten threads with the proper torque and use the correct thread sizes.
- Ensure the lock nut is securely tightened after adjusting the cylinder speed.
- Do not use excessive force or tools to rotate the xxxx .
3. **Connection Thread Size:**
- Use the appropriate wrench size for different thread sizes as indicated in the manual.
4. **Handle Installation:**
- Be cautious with the handle attachment as it is press-fitted. Do not apply excess torque.
5. **Piping:**
- Use the proper tightening torque for different thread sizes.
- Wind sealant tape correctly and ensure proper sealing.
6. **Precautions for One-Touch Tube Fittings:**
- Cut the tube perpendicularly using an SMC tube cutter.
- Ensure the tubing is inserted correctly and securely into the fitting.
7. **Air Supply:**
- Use clean air and install an air filter with proper filtration size.
- Ensure the fluid and ambient temperatures are within the specified range.
8. **Operating Environment:**
- Avoid corrosive atmospheres, direct sunlight, heavy vibration, or shock.
- Do not mount the product where it is exposed to radiant heat.
9. **Maintenance:**
- Perform regular maintenance and inspection as per the manual to prevent malfunction or damage.
- Drain flushing and removal of equipment should be done with caution.
By following these guidelines and precautions outlined in the user manual, you can ensure the safe and efficient installation and operation of the SMC ASB Metal Speed Controller with One-Touch Fitting.
Add New Comment