User Manual Q&AAnswer
Sep 28, 2025 - 10:07 AM
To connect the dimmer switch to Wi-Fi for remote control, follow these steps as per the instruction manual:
1. **Turn on the dimmer:** Make sure the dimmer switch is powered on.
2. **Enter pairing mode:** Press the button on the dimmer switch six times within three seconds. On the sixth press, hold the button for more than 5 seconds until the LED indicator starts flashing. This action will put the dimmer switch into pairing mode.
3. **Connect using the app:** Once the dimmer switch is in pairing mode, open the corresponding app on your phone that controls the dimmer switch. Follow the app's instructions to connect the dimmer switch to your Wi-Fi network.
4. **Control remotely:** After successful pairing, you can now control the dimmer switch remotely using the app on your phone.
By following these steps, you should be able to successfully connect your Ningbo Everflourish Smart Technology ED26WF-2US1 Dimmer Switch to Wi-Fi for remote control.
Add New Comment