User Manual Q&AAnswer
Sep 28, 2025 - 09:48 AM
To start logging data with the Major Tech MT668 Temperature and Humidity Data Logger, follow these steps:
1. **Select Measuring Cycle:** Choose the desired measuring cycle from the available options (2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr).
2. **Start Logging:** Press the "Start" button on the data logger to initiate the logging process.
3. **Monitor Status:** Keep an eye on the LED indicators on the data logger. The green Record LED will indicate that the data logger is actively recording data.
4. **Alarm Notification:** If you have set up user-selectable alarms for temperature and humidity, the corresponding alarm LEDs (red/yellow) will alert you if the readings exceed the alarm levels.
5. **Connect to PC:** When you're ready to retrieve the logged data, connect the data logger to your PC using the USB interface.
6. **Download Data:** Use the supplied analysis software to download the logged data from the data logger to your computer for further analysis and review.
By following these steps, you can effectively start logging temperature and humidity data with the Major Tech MT668 Data Logger and utilize its features to monitor environmental conditions accurately.
Add New Comment