User Manual Q&AAnswer
Sep 27, 2025 - 05:04 PM
To enable the Bluetooth panic button for your SMARTWITNESS KP2 Vehicle Recorder, follow these steps:
1. **Enable Pairing:**
- Access the KP2 Configuration Tool settings in Info > Service.
- Select "Flic" in the Bluetooth Panic field.
- Select "Panic Button" in the Bluetooth Button Function field.
2. **Pairing Process:**
- Ensure that the KP2 is powered on, and the blue LED is solid.
- Press and hold the small black button on the device until the Warning and Record LEDs blink, indicating the device is in pairing mode.
- Press and hold the external Bluetooth button for 7 seconds.
- Once completed, the Warning and Record LEDs will return to their previous state, indicating successful pairing of your KP2 Bluetooth panic button.
Remember, the Bluetooth panic button will not work unless you have correctly configured these settings in the KP2 Configuration Tool as outlined above. For further assistance or to purchase a Bluetooth panic button, contact SMARTWITNESS or your supplier.
Add New Comment