User Manual Q&AAnswer
Sep 26, 2025 - 05:09 PM
Connecting Multiple Displays:
1. **For Windows OS:**
- Connect the docking station to your laptop via the USB cable.
- Connect HDMI and VGA monitors using the respective cables.
- Right-click on the desktop and select "Monitor" to configure the display settings.
- Choose the desired display mode (mirror, extend, main display).
2. **For Mac OS:**
- Connect the docking station to your laptop via the USB cable.
- Connect the VGA monitor first, then turn on the power, and connect the HDMI monitor.
- Go to "System Preferences" and select "Monitor" to configure the display settings.
- Choose the desired display mode.
#### Audio Setup:
1. **For Windows OS:**
- Click on the audio icon in the bottom right corner of the screen.
- Select the audio source for your headphones or speakers.
- Note that only HDMI2 audio supports 3.5mm headphones.
2. **For Mac OS:**
- Go to "System Preferences" and select "Audio Device" to choose the audio output.
- Note that only HDMI2 audio supports 3.5mm headphones.
#### Driver Installation:
1. **For Windows OS:**
- Download the DisplayLink USB Graphics Software for Windows from the provided link.
- Run the exe file, follow the on-screen instructions, and wait for the installation to finish.
2. **For Mac OS:**
- Download the DisplayLink USB Graphics Software for macOS from the provided link.
- Run the pkg file, follow the on-screen instructions, and restart your Mac after installation.
By following these steps and referring to the user manual for additional guidance, you should be able to effectively set up and use the QGeeM D3908 Mini USB 3.0 Docking Station with multiple displays and audio on different operating systems.
Add New Comment