User Manual Q&AAnswer
Sep 26, 2025 - 04:53 PM
To switch between different modes and configure the player order on the Pacto 3000T 3 Player Control Interface, you can follow these steps based on the user guide provided:
1. **Player Button Wiring:** Ensure all button and joystick inputs are wired with one side to ground. The default player order is 1, 3, 2, which is more comfortable for 2 player games. You can switch to 3P mode to put players in the 1, 2, 3 order or remap games in emulators accordingly.
2. **Mode Input Wiring:** There are various ways to switch between modes, including using shortcuts by holding various start and select buttons, wiring mode buttons, or using switches. Each mode button or switch should be connected to its respective input pin on one side and ground on the other side.
3. **Mode Switch Wiring Option:** Different mode switches like DPAD/ANA-S, DPAD/ANA-F, 2P/3P, 2P/TS, 2P/DIS, TURB/TURBO, and 8TO6/8TO6 have specific wiring instructions provided in the user guide. Follow these instructions to wire the switches correctly.
4. **Connectors:** The Pacto 3000T uses spring terminals that accept 2 or 3 wires typically used for arcade control wiring. Ensure you use the recommended wire gauge and strip length for proper connectivity.
5. **Advanced Modes:** The interface offers various modes like 2P, 3P, TS, INT, DIG, ANG-S, ANG-F, DIS, TURBO, and 8to6. Each mode serves a specific purpose, such as changing player positions, enabling twinstick mode, or activating turbo functions.
6. **Mode Selection Shortcuts:** Use dedicated shortcuts like holding specific buttons for 8 seconds to enable different modes. For example, holding Player 1 Start enables Slow Analog, Player 2 Start activates 2 Player Mode, and Player 3 Start switches to Twinstick Mode.
By following the wiring instructions, utilizing mode switches, and understanding the different modes available on the Pacto 3000T, you can easily configure your arcade controls for optimal performance and gameplay experience.
Add New Comment