User Manual Q&AAnswer
Sep 26, 2025 - 04:20 PM
To connect the REMINGTON SOLAR WF2022 SolaCom Wifi Controller to the internet and set it up for use, follow these steps:
1. **Hardware Setup:**
- Plug the LAN cable into the LAN port of the SolaCom Wifi Controller.
- Connect the other end of the LAN cable to your router to establish an internet connection.
2. **Power Supply:**
- Use a Micro USB DC 5V power supply to power the device.
- The normal operation current is 160mA, and the peak current when sending and collecting data should not exceed 500mA.
3. **Indicator Lights:**
- The device has two internet indicator lights and an RF indicator light.
- The left light will be red when the internet is not connected and blue when connected.
- If the left light flashes red quickly, the device is receiving an RF signal and starting the resolution process.
4. **Mobile App Setup:**
- Download the SolaCom mobile app, which is designed for the WFCTR-22 device.
- Follow the instructions in the app to add the gateway and devices easily.
- The app provides features for easy network connection and quick setup.
5. **Network Configuration:**
- Configure the network settings within the app to ensure proper communication with the device.
- Set up multi-channels, GFSK modulation, and define low power consumption operation modes as needed.
6. **Troubleshooting:**
- If you encounter any issues during setup or usage, you can contact remingtonsolar for assistance.
- For video instructions, you can watch the installation video , which is applicable to similar Wi-Fi installation processes.
By following these steps and referring to the provided manual, you should be able to successfully connect and set up the REMINGTON SOLAR WF2022 SolaCom Wifi Controller for your desired applications.
Add New Comment