User Manual Q&AAnswer
Sep 26, 2025 - 02:01 PM
To connect the Wisenet SPD-152 Network Video Decoder to your network using a router, follow these steps as per the user manual:
1. **Connecting the cable:** Ensure you have the necessary Ethernet cable to connect the decoder to your router.
2. **Connecting the PC and Router:**
- Refer to the user manual of your router for specific instructions on connecting your PC to the router.
3. **Connecting the Decoder and Router:**
- Access the `` settings in the decoder's `` menu.
- Set the `` and `` in the `` section.
- Ensure that the `` on your local PC matches the `` of the decoder.
- The first three numbers of the decoder's `` should match the first three numbers of the `` on your local PC.
4. **Additional Information:**
- For detailed instructions, refer to the installation guide provided with the decoder.
- Ensure you have a stable and secure network connection to enable smooth operation and remote access.
- If you encounter any issues during the setup process, refer to the troubleshooting section of the user manual or contact technical support for assistance.
By following these steps, you should be able to successfully connect your Wisenet SPD-152 Network Video Decoder to your network using a router for efficient monitoring and access to video feeds.
Add New Comment