User Manual Q&AAnswer
Sep 25, 2025 - 05:20 PM
To set the timer on the ABESTORM OZ-G700 Ozone Generator, follow these steps:
1. Make sure the device is plugged in and powered on.
2. Press the "CLOCK" button to set the desired running time. The default setting is 30 minutes, and you can cycle between 00:00 and 02:00 hours.
3. When the "CLOCK" function is activated, the device will run according to the set working time.
4. If you want the device to run in cycles, you can also set the "PERIOD" button to 12 or 24 hours. This means the device will run again after 12 or 24 hours of shutdown, following the time set by the clock function.
5. Once you have set the timer, press the "POWER" button to start the device. The display panel will light up, indicating that the cleaning cycle has begun.
6. After the preset time has elapsed, the ABESTORM OZ-G700 Ozone Generator will automatically shut down.
Remember to always monitor the device while it is running and follow the safety precautions outlined in the user manual to prevent any harm to yourself or others. If you encounter any issues or have further questions, you can refer to the user manual or contact ABESTORM customer service for assistance.
Add New Comment