User Manual Q&AAnswer
Sep 25, 2025 - 03:04 PM
To determine if your existing fixture is suitable for the NUVO S11919 CCT Selectable LED Linear T8 Type B Lamps retrofit kit installation, follow these key considerations and steps:
1. **Check Fixture Construction Features and Dimensions:**
- Ensure that your fixture has the construction features and dimensions specified in the photographs and/or drawings provided in the manual.
- Verify that the input rating of the retrofit kit does not exceed the input rating of your existing luminaire.
2. **Inspect Existing Wiring:**
- Before installing the retrofit kit, check the existing wiring for any damage. Do not proceed with installation if the wires are damaged.
3. **Identify Lamp Holders:**
- Determine the type of lamp holders in your fixture. For single-ended wiring installation of SATCO tubes, non-shunted G13 lamp holders are required.
4. **Single-Ended Wiring Installation:**
- If your fixture has non-shunted lamp holders, follow the instructions provided in the manual for single-ended wiring installation.
- Ensure that power is only applied to the endcap labeled Side A for single-ended wiring installations.
5. **Double-Ended Wiring Installation:**
- If your fixture has shunted or non-shunted G13 lamp holders, follow the instructions for double-ended wiring installation provided in the manual.
- Make sure to connect the terminals from the first lamp to the matching terminals on the lampholder of the second lamp for multiple lamp applications.
6. **Complete Electrical Connections:**
- Use appropriate connectors/wire nuts to complete all electrical connections as per local and national electrical codes.
- Reinstall the wiring compartment cover after making all connections.
7. **Install LED Tubes and Apply Power:**
- Install the SATCO tubes ensuring that Side A is installed in the lamp holders wired to the line and neutral.
- Apply power to the fixture and check for illumination to confirm successful installation.
By following these steps and considerations outlined in the manual, you can determine if your existing fixture is suitable for the NUVO S11919 CCT Selectable LED Linear T8 Type B Lamps retrofit kit installation.
Add New Comment