User Manual Q&AAnswer
Sep 25, 2025 - 11:56 AM
To switch between Auto Mode and DMX Mode on the beamZ DMX-004DII 4 Channel Switch Pack, follow these steps:
1. **Auto Mode:**
- Connect your lights to the unit.
- Press the "MODE" button to select "P" (program).
- Use the "UP" or "DOWN" buttons to select a program from P1 to P16.
- Press the "MENU" button to select "Sp" (speed).
- Use the "UP" or "DOWN" buttons to adjust the speed from SP01 to SP99. SP01 represents a 30-second step, while SP99 is the fastest at 10 steps per second.
2. **DMX Mode:**
- Connect the unit to a DMX controller.
- Press the "MODE" button to select "A" (address).
- Use the "UP" or "DOWN" buttons to choose the DMX start address from 001 to 512.
- Press the "MENU" button to select "CH" (channel).
- Use the "UP" or "DOWN" buttons to select 1, 2, or 4 CH DMX mode.
- CH1: All unit outputs receive the selected DMX value.
- CH2: Unit is in 2-channel mode. CH1 and CH2 are one DMX channel, while CH3 and CH4 are the second DMX channel.
- CH4: Unit is in 4-channel mode, with each output having its own DMX channel.
- DMX value of switching: 0 to 127 is Off, 128 to 255 is On.
By following these steps, you can easily switch between Auto Mode and DMX Mode on your beamZ DMX-004DII 4 Channel Switch Pack.
Add New Comment