User Manual Q&AAnswer
Sep 23, 2025 - 12:28 PM
To pair the wireless remote with the speaker lighting control module, follow these steps:
1. **Power On:** Ensure that the speaker lighting control module is powered on and ready for pairing.
2. **Insert Batteries:** Insert two AAA batteries into the wireless remote control if you haven't already done so.
3. **Pairing Process:**
- Press and hold the power button on the wireless remote control until the LED indicator light starts flashing.
- Within 10 seconds, press and hold the "Pair" button on the speaker lighting control module until the LED indicator on the module starts flashing.
- The LED indicators on both the remote and the module should now be flashing, indicating they are in pairing mode.
4. **Successful Pairing:** Once the pairing is successful, the LED indicators on both the remote and the module will stop flashing and remain solid.
5. **Testing:** Test the remote control by adjusting the color, brightness, speed, and mode settings to ensure it is controlling the speaker lighting as intended.
If you encounter any issues during the pairing process, refer to the troubleshooting section in the instruction manual or contact Fusion's customer support for assistance.
Add New Comment