User Manual Q&AAnswer
Sep 22, 2025 - 04:53 PM
To set up your Wildgame Innovations SWTC2LO Trail Camera for optimal performance, follow these steps based on the user manual:
1. **Battery Installation:**
- Open the door at the bottom of the camera and drop the battery tray.
- Align the batteries correctly (do not mix old and new batteries or different types of batteries).
2. **SD Card Installation:**
- Insert an SD memory card (up to 32GB) with the notch in first and metal pins facing you.
- Make sure the camera is powered off before removing or installing an SD card.
3. **Time Zone Setting:**
- Slide the TIMEZONE switch to set your time zone (P, M, C, E) based on your region.
4. **Delay Setting:**
- Slide the DELAY switch to select your desired delay time (15 seconds, 30 seconds, or 1 minute).
5. **Mounting:**
- Attach the camera to a tree using the provided strap and clip, ensuring it is securely fastened.
- Position the camera at a recommended distance of 25-30 feet from the target area for optimal imaging quality.
6. **Maintenance Tips:**
- Avoid mounting the camera facing direct sunlight to improve image quality.
- Clean the camera lens cover, flash cover, and PIR sensor cover regularly, especially in dusty environments.
- Check the camera mounting periodically to ensure it is secure.
- Always securely latch the door closed to activate the moisture seal.
- Check batteries frequently for corrosive build-up.
7. **Retrieving Images:**
- Remove the SD card from the camera and insert it into an SD card reader to view the files.
- You can also use the WGI SD Card Reader and the WGI Huntsmart app for mobile devices to access and upload photos to the cloud.
By following these steps and tips, you can ensure that your Wildgame Innovations SWTC2LO Trail Camera functions effectively and provides you with high-quality images for your scouting needs.
Add New Comment