User Manual Q&AAnswer
Sep 21, 2025 - 04:12 PM
To program memory channels on the ALINCO DR-119E T VHF FM Mobile Transceiver, follow these steps:
1. **Access Memory Mode:** Press the "Function/Memory" button to enter memory mode.
2. **Select Memory Channel:** Use the "VFO/M/Channel Step" key to select the desired memory channel where you want to store the frequency.
3. **Enter Frequency:** Use the main dial to tune to the desired operating frequency.
4. **Store Frequency:** Press the "Write" key to store the frequency in the selected memory channel.
5. **Set Standard Offset:** If required, set the standard offset for the memory channel.
6. **Repeat Steps:** Repeat the above steps for each memory channel you wish to program.
7. **Recall Memory Channels:** To recall a stored memory channel, simply select the desired memory channel using the "VFO/M/Channel Step" key.
By following these steps, you can easily program and store operating frequencies and other information in the memory channels of the ALINCO DR-119E T VHF FM Mobile Transceiver as per the user manual provided.
Add New Comment