User Manual Q&AAnswer
Sep 21, 2025 - 02:32 PM
To set up the network connection for the TOA N-SP80MS1 Intercom System, follow these steps as outlined in the installation guide:
1. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router using the Ethernet cable provided in the package.
2. Connect the 12V DC output plug to the power jack on the phone and plug the power adapter into an electrical outlet.
3. The LCD will display booting up or firmware upgrading information. Wait for the main screen display to show up before proceeding.
4. You can further configure the network connection using either a static IP, DHCP, or other settings from the menu on the touch screen.
It is important to follow these steps carefully to ensure that the network connection is established correctly. If you encounter any issues during the setup process, refer to the installation guide for troubleshooting tips or contact TOA customer support for assistance.
Add New Comment