User Manual Q&AAnswer
Sep 19, 2025 - 01:59 PM
To change the reference pitch on your KORG AW-OTG/AW-OTB Clip-On Tuner, follow these steps as outlined in the owner's manual:
1. Press the CALIB button on the tuner. The current reference pitch setting will appear on the display.
2. While the current setting is displayed, press the CALIB button again to adjust the reference pitch.
3. Keep pressing the CALIB button until you reach the desired reference pitch frequency.
4. If there is no button input for about 2 seconds, the new setting will be applied, and the tuner will return to tuning mode.
By following these steps, you can easily customize the reference pitch on your KORG AW-OTG/AW-OTB Clip-On Tuner to suit your tuning needs.
Add New Comment