User Manual Q&AAnswer
Sep 19, 2025 - 10:28 AM
1. **Power On Status:** Ensure the remote controller is powered on.
2. **Access Dual Rate Setting:** Press the MODE button for one second until you hear a beep. The display will show "REVERSE" and channel numbers will blink.
3. **Navigate to Dual Rate Setting:** Press the FLIP button until you reach the D/R setting. The display will show "D/R" and channel numbers.
4. **Enter Setting Mode:** Press the MODE button to enter the setting. The first channel will start flashing. Use the lever to select the desired channel. The selected channel will flash.
5. **Adjust Rudder Movement:** Use the up or down buttons to extend or shorten the rudder movement path as per your preference.
6. **Save Setting:** Press the MODE button to confirm and save the setting for that channel. Press the END button twice to exit the setting mode.
Repeat the above steps for each aileron channel you wish to adjust the dual rate for. This function allows you to fine-tune the control sensitivity of your model helicopter to suit your flying style and preferences.
For further assistance or detailed instructions, you can refer to the AMEWi T6REMOTE 6CH Remote Controller Instruction Manual provided with the product or contact AMEWI Trade GmbH for support.
Add New Comment