User Manual Q&AAnswer
Sep 19, 2025 - 10:08 AM
1. **Drill a Hole:** Begin by drilling a hole in the table or furniture where you wish to install the Powerdot MICRO charger.
2. **Insert the Powerdot MICRO:** Insert the Powerdot MICRO into the hole you drilled, then feed the power cable through the plastic fastening nut.
3. **Use the Fastening Nut:** Turn the fastening nut clockwise as far up the thread as possible until the product is fully rigid against the table or furniture.
4. **Connect and Plug In:** Connect the USB Micro cable to the grommet on the Powerdot MICRO and to the adapter. Finally, plug the adapter into a wall socket or power strip of your choice.
By following these steps, you can properly install and use the KONDATOR 935-PM32 Powerdot MICRO Charger. If you encounter any issues or have further questions, refer to the user guide provided with the product or contact Kondator AB for assistance.
Add New Comment