User Manual Q&AAnswer
Sep 18, 2025 - 03:59 PM
If your WLS ED300 Light Source is not starting up, here are some troubleshooting steps you can follow based on the manual:
1. **Check Power Supply:**
- Ensure the power supply cable plug is correctly inserted into an active 220V~ outlet socket.
- Confirm that the I/O switch is in the ON position.
2. **Technical Assistance:**
- If the equipment still does not start, contact Euroclinic technical assistance service for further support.
- If necessary, send the equipment to the Technical Assistance service for inspection and repair.
3. **Preventive Measures:**
- Always use the original packing if you need to send the equipment for servicing to prevent transport-related damages.
- Obtain authorization from Medi-Care Solutions srl. before sending back the equipment, even if it is under warranty, to avoid warranty issues.
4. **Contact Information:**
- For technical assistance, you can reach out to Medi-Care Solutions srl. at the provided contact details:
- Phone: +39 0542 642046
- Fax: +39 0542 642355
- Email: info@euroclinic.it
Following these steps and seeking assistance from the manufacturer's technical support should help diagnose and resolve any issues with the WLS ED300 Light Source not starting up
Add New Comment