User Manual Q&AAnswer
Sep 18, 2025 - 02:35 PM
To upload a custom standby image to your SE8000 Room Controller, follow these steps:
1. **Prepare the Image File:**
- The image size should be 240 pixels horizontal x 320 pixels vertical.
- Save the image in a 24-bit bitmap (.bmp) format.
2. **Using the Uploader Tool:**
- Open the Uploader Tool on your computer.
- Navigate to the "Custom Standby Image" section.
- Select either "From File" or "From List" option.
- If you choose "From File," click on "Browse" to select the custom image file from your computer.
- If you choose "From List," select the desired image file from the list shown on the left pane.
3. **Upload the Image:**
- Make sure the USB cable is firmly connected between your computer and the Room Controller.
- Click on the "Upload" button in the Uploader Tool to upload the custom image to the Room Controller.
- The Room Controller will reboot once the upload is complete.
- Disconnect the USB cable from both the Room Controller and your computer.
Add New Comment