User Manual Q&AAnswer
Sep 17, 2025 - 03:34 PM
To program the Push-Button SwitchPod for your desired lighting control settings, follow these steps as outlined in the manual:
1. **Enter Programming Mode:**
- Press and hold the uppermost button until the LED flashes rapidly, then release the button.
2. **Select On Mode Function:**
- Press the button twice to enter the On Mode function.
3. **View Current Setting:**
- The current On Mode setting will be displayed through a sequence of LED flashes. For example, one flash indicates Auto-On mode.
4. **Change Setting:**
- Interrupt the flashing sequence by pressing the button the number of times corresponding to the new desired setting. For instance, press twice for Manual On mode. The switch will confirm the new setting by flashing back.
5. **Finalize Setting:**
- While the new setting is being displayed, press and hold the button until the LED flashes rapidly, then release the button.
6. **Confirm and Activate:**
- Press the button twice to confirm and activate the new setting. The LED will flash twice to indicate acceptance of the new setting.
7. **Exit Programming Mode:**
- To exit programming mode without saving changes, wait for the blink-back sequence to repeat 10 times, then return to step 1.
By following these steps, you can easily program the Push-Button SwitchPod to suit your specific lighting control preferences, whether it involves manual operation, dimming control, multi-way switching, or adjusting between auto-on and manual-on modes.
Add New Comment