User Manual Q&AAnswer
Sep 16, 2025 - 02:53 PM
To set the temperature and timer on the BW2100 Wall Heater with Remote Controller, follow these steps as outlined in the user manual:
1. **Temperature Setting:**
- Press the "Temperature setting" button on the remote control.
- Use the "+" and "-" buttons to set the desired temperature between 18 – 45 °C.
- If you set the temperature setting 3 degrees higher than the ambient temperature, the device will automatically switch to high power.
- To save the settings, press the "OK" button or wait 5 seconds after the LED flashes.
2. **Timer Setting:**
- Press the "Timer" button on the remote control.
- You can schedule the product to turn off automatically by pressing the button multiple times to increase the remaining time by 1 hour until shut down (1H, 2H, 3H, 4H… 8H).
3. **Weekly Timer Setting:**
- Press the "Date setting" button on the remote control to set the current date.
- After setting the date, the clock setting interface will appear automatically.
- Use the "+" and "-" buttons to set the hour (0-23) and then the minute (0-59).
- Press "OK" to save the time setting.
- You can choose from 6 preset timing options (P1, P2, P3, P4, P5, P6) for different days of the week.
4. **Clear Settings:**
- To clear the temperature setting, press the "Clear temperature setting" button on the remote.
- To clear the weekly timer setting, press the "Clear weekly timer" button in the settings.
By following these steps, you can easily adjust the temperature and set the timer on your BW2100 Wall Heater with Remote Controller for personalized heating control.
Add New Comment