User Manual Q&AAnswer
Sep 15, 2025 - 10:42 AM
According to the instruction manual for the Metabo SXE 400 Random Orbital Sander, here are the steps to properly clean and maintain the sander:
1. **Empty Clogged Dust Channel:**
- Loosen the xxxx with the hexagon spanner.
- Remove the dust channel and empty it.
- Reinsert the dust channel and tighten the xxxx .
2. **Clean the Machine Regularly:**
- Vacuum clean the ventilation louvres on the motor.
3. **Replace Worn Sanding Plate:**
- Remove the fixing xxxx on the underside of the sanding plate.
- Remove the old sanding plate and replace it with a new one, ensuring it engages properly on the carrier disc.
- Refit the fixing xxxx and tighten it.
4. **Readjust Braking Ring:**
- When the braking force decreases, readjust the braking ring by loosening the xxxx , pushing the ring forward to the sanding plate until light contact is established, and then tightening the xxxx .
5. **Replace Braking Ring:**
- To change the worn braking ring, remove the sanding plate, tensioning band, and old braking ring.
- Put on the new braking ring until it stops, then refit the tensioning band and sanding plate.
By following these maintenance steps outlined in the manual, you can ensure that your Metabo SXE 400 Random Orbital Sander remains in good working condition and provides optimal performance for your sanding tasks.
Add New Comment