User Manual Q&AAnswer
Sep 09, 2025 - 01:26 AM
If you are facing issues with your IKEA FAMMARP reclining sofa module, here are some common troubleshooting steps based on the user manual:
1. **The reclining module does not work:**
- Check if the power cable is properly connected to both the sofa and the wall socket.
- Test the power supply by connecting a lamp or similar object to the power socket.
- Inspect for any visual damage to the cables or power supply. Damaged parts should be replaced.
2. **The reclining module stops and can only run in the opposite direction:**
- Ensure the reclining module is in the fully reclined or fully upright position as it can only move in the opposite direction when it reaches these limits.
3. **The reclining module runs automatically to the fully reclined/upright position:**
- Check for any objects pressing on the control buttons and remove them.
- Ensure there are no objects stuck between the buttons causing them to malfunction.
4. **The reclining module is running slower than usual:**
- Remove any excess load on the reclining module and try again.
5. **The reclining module cannot move to the upright position:**
- Check for obstacles under the footrest and remove them to allow the module to function properly.
6. **There is a noise when the reclining module moves:**
- Identify if the noise is coming from the motor or the mechanism. A damaged motor or mechanism may require replacement.
If after troubleshooting the issue persists, it is recommended to contact your nearest IKEA store or Customer Service for further assistance. Remember to always disconnect the power cable from the wall socket before performing any maintenance on the reclining sofa module.
Add New Comment