User Manual Q&AAnswer
Sep 08, 2025 - 08:54 PM
To connect and control the WiZ 3241 659 75771 RGBW LED Strip Kit using the WiZ app on your smartphone, please follow these steps as outlined in the user guide:
1. **Download the WiZ App**: Make sure you have the WiZ app installed on your smartphone. You can download it from the App Store (for iOS devices) or Google Play Store (for Android devices).
2. **Power On the LED Strip**: Plug in the LED strip and ensure it is powered on. The LED strip should light up once it's connected to power.
3. **Connect to Wi-Fi**: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The WiZ LED strip does not support 5GHz networks.
4. **Open the WiZ App**: Launch the WiZ app on your smartphone.
5. **Add Device**: In the WiZ app, tap on the "Add Device" button. Follow the on-screen instructions to add a new device.
6. **Select Device Type**: Choose "Lightstrip" or "LED Strip" as the device type you want to add.
7. **Follow Pairing Instructions**: The app will guide you through the pairing process. This usually involves putting the LED strip into pairing mode and connecting it to your Wi-Fi network.
8. **Control the LED Strip**: Once the LED strip is successfully connected, you can control it using the WiZ app. You can change colors, adjust brightness, set schedules, and more directly from your smartphone.
By following these steps, you should be able to easily connect and control your WiZ 3241 659 75771 RGBW LED Strip Kit using the WiZ app on your smartphone. If you encounter any issues during the setup process, refer to the user guide for troubleshooting tips or contact WiZ customer support for assistance.
Add New Comment