User Manual Q&AAnswer
Sep 08, 2025 - 08:12 PM
To use the 3B Luna QR App with your Luna CPAP device, follow these steps as outlined in the product manual:
1. If you have a Luna II Device (CPAP LG2000, Auto-PAP LG2A00):
- While in STAND-BY MODE, briefly press the ALARM SILENCE button located to the left of the selector xxxx .
2. If you have a Luna G3 Device (CPAP LG3500, Auto-PAP LG3600, Bilevel 25A LG3700, or Bilevel ST 30Vt LG3800):
- Turn the xxxx until "Report" is highlighted in BLUE.
- Push the xxxx and select "iCODE QR/QR+".
- Select "iCode QR+" by turning the selector xxxx clockwise or counterclockwise. The corresponding QR+ code will appear in the display window.
3. Using the 3B Luna QR App on your smartphone or smart device:
- Open the app and select the "iCode QR+" option.
- The app will begin to scan for the QR Code. Center the QR Code within the square on your smart device.
- Once scanned, you will see a summary of the scanned data and have the option to review the detail. The sleep data will be automatically transmitted and uploaded into the patient's file associated with the serial number and PIN.
4. To exit from the iCode QR+ screen:
- For Luna II devices, turn the selector xxxx BACK and press the xxxx .
- For G3 devices, press the HOME button twice.
5. Note:
- The app only supports the QR+ option.
- Download the FREE 3B Luna QR App from the App Store or Google Play to your smart device.
By following these steps, users can effectively use the 3B Luna QR App to access and transmit data from their Luna CPAP devices for monitoring and healthcare provider review.
Add New Comment