User Manual Q&AAnswer
Sep 05, 2025 - 03:47 AM
To connect the Fifine AM8 AmpliGame Dynamic Mic with Touch to your computer or game console, follow these steps:
1. **USB-C Port Connection:**
- Fully plug the included USB-C cable into the USB-C port at the mic bottom.
- Plug the USB connector into your computer or PS4/5.
- Turn down the mic gain first, then gradually turn it up until you reach the desired loudness (recommended setting the mic gain xxxx at about 30% for better effect).
2. **XLR Port Connection:**
- Fully plug an XLR cable (not included) female end into the XLR port at the mic bottom.
- Plug the male end into a sound card, mixer, or audio interface. No preamp or phantom power is needed.
- Maintain a speaking distance of 2 to 6 inches for better output sound quality.
- If connecting the mic to different devices via Type-C and XLR ports simultaneously, connect the XLR first, then the Type-C to avoid sound issues.
3. **Functionality:**
- All function keys and headphone monitoring are available when using the USB-C port connection.
- When using the XLR port connection, these functions are invalid, and you can operate the mic through the connected sound card, mixer, or audio interface.
By following these guidelines, you can successfully connect your Fifine AM8 AmpliGame Dynamic Mic with Touch to your computer or game console for recording or gaming purposes.
Add New Comment