User Manual Q&AAnswer
Sep 01, 2025 - 09:49 PM
To change the IP address of the GPI Dual Lens ANPR Camera, follow these steps using the IP Installer software:
1. **Download IP Installer Plus.exe Software:**
- Download the IP Installer Plus.exe software from the manufacturer's website.
2. **Launch IP Installer Software:**
- Double click on the IP Installer Plus.exe file to launch the software.
3. **Search for IP Cameras:**
- Click on the "SEARCH" button in the software to scan the network for connected IP cameras. The software will display a list of searched cameras.
4. **Select Camera and Change IP Address:**
- After the search is complete, select the GPI Dual Lens ANPR Camera from the list.
- Click on "IP SETUP" to change the IP address, Gateway, and Net Mask of the selected camera.
5. **Access Web Viewer:**
- Click on the "WEB" button to access the web viewer page for the selected camera.
6. **Firmware Update (Optional):**
- If needed, firmware updates can be performed by clicking on the "UPDATE" button. Ensure you have the firmware file loaded on your PC before updating.
7. **Additional Features:**
- The software also allows filtering IP cameras by MAC address or IP range for easier identification.
8. **Default IP Address:**
- The factory default IP address of the camera is provided in the manual. Ensure to assign a unique IP address to the camera within the recommended range when connecting it directly to a PC.
By following these steps using the IP Installer software, users can easily change the IP address of the GPI Dual Lens ANPR Camera for network connectivity and monitoring.
Add New Comment